Introduction
In order to make knative work with AKS, in addition to the official documentation, it takes some time, so I will explain how to do it.The whole flow is the same as the documentation for starting AKS, installing isto, and installing knative, but it requires settings not found in the documentation.Now I willĀ explain.
I will omit the explanation of knative itself.In addition, since there is a possibility that there is a dependency on the verified version etc., there is no guarantee that it will work completely.It is assumed that Azure CLI and kubectl are already available.
Documenthttps://www.knative.dev/docs/install/knative-with-aks/
Start ofĀ AKS
Basically the same as the document.
Specifies the name of the environment.
export LOCATION=eastus
export RESOURCE_GROUP=knative-group
export CLUSTER_NAME=knative-cluster
Create a resourceĀ group
az group create --name $RESOURCE_GROUP --location $LOCATION
Start AKS.The version is 1.11.8. Maybe even if 1.12 system is OKĀ ā¦
az aks create --resource-group $RESOURCE_GROUP \
--name $CLUSTER_NAME \
--generate-ssh-keys \
--kubernetes-version 1.11.8 \
--enable-rbac \
--node-vm-size Standard_DS3_v2
Set to be able to operate with kubectl. (--overwrite-existing overwrites existing settings)
az aks get-credentials --resource-group $RESOURCE_GROUP --name $CLUSTER_NAME --admin --overwrite-existing
Make sure it has started without problems.
kubectl get node
NAME STATUS ROLES AGE VERSION
aks-nodepool1-24002009-0 Ready agent 3m v1.11.8
aks-nodepool1-24002009-1 Ready agent 3m v1.11.8
aks-nodepool1-24002009-2 Ready agent 4m v1.11.8
istio installation
Proceed as per the document.
kubectl apply --filename https://github.com/knative/serving/releases/download/v0.4.0/istio-crds.yaml
kubectl apply --filename https://github.com/knative/serving/releases/download/v0.4.0/istio.yaml
Label it.
kubectl label namespace default istio-injection=enabled
Check which pod isĀ started.
kubectl get pods --namespace istio-system
Wait for it to be Running or Completed.
NAME READY STATUS RESTARTS AGE
cluster-local-gateway-76db55c785-wkjvh 1/1 Running 0 5m
istio-citadel-746c765786-d758c 1/1 Running 0 6m
istio-cleanup-secrets-cj8cf 0/1 Completed 0 6m
istio-egressgateway-7b46794587-jbk2s 1/1 Running 0 6m
istio-galley-75c6976d79-z5hp4 1/1 Running 0 6m
istio-ingressgateway-57f76dc4db-xqx8l 1/1 Running 0 6m
istio-pilot-6495978c49-4wl8w 2/2 Running 0 5m
istio-pilot-6495978c49-csfxn 2/2 Running 0 5m
istio-pilot-6495978c49-llw97 2/2 Running 0 6m
istio-policy-6677c87b9f-7ff2g 2/2 Running 0 6m
istio-sidecar-injector-879fd9dfc-2dfkt 1/1 Running 0 5m
istio-statsd-prom-bridge-549d687fd9-8rbfw 1/1 Running 0 6m
istio-telemetry-7d46d668db-khglq 2/2 Running 0 6m
knative installation
Apply the following, but proceed while checking the startup of each pod.And then, after applying the service separately, work willĀ occur.
kubectl apply --filename https://github.com/knative/serving/releases/download/v0.4.0/serving.yaml
kubectl apply --filename https://github.com/knative/build/releases/download/v0.4.0/build.yaml
kubectl apply --filename https://github.com/knative/eventing/releases/download/v0.4.0/release.yaml
kubectl apply --filename https://github.com/knative/eventing-sources/releases/download/v0.4.0/release.yaml
kubectl apply --filename https://github.com/knative/serving/releases/download/v0.4.0/monitoring.yaml
kubectl apply --filename https://raw.githubusercontent.com/knative/serving/v0.4.0/third_party/config/build/clusterrole.yaml
If an error occurs during application, run the sameĀ again.
error: unable to recognize "https://github.com/knative/serving/releases/download/v0.4.0/serving.yaml": no matches for kind "Image" in version "caching.internal.knative.dev/v1alpha1"
Apply theĀ service.
kubectl apply --filename https://github.com/knative/serving/releases/download/v0.4.0/serving.yaml
Check the launch of theĀ pod.
kubectl get pods --namespace knative-serving
Activator and autoscaler will result in an error. We need to eliminate this.
NAME READY STATUS RESTARTS AGE
activator-6f7d494f55-sdhcw 1/2 CrashLoopBackOff 3 1m
autoscaler-5cb4d56d69-xng46 1/2 CrashLoopBackOff 3 1m
controller-6d65444c78-wrnnc 1/1 Running 0 1m
webhook-55f88654fb-tndgw 1/1 Running 0 1m
The problem is reported below. The solution is also described.Although not described in detail, it seems that there is a problem withĀ istio.
Cannot install Knative servinghttps://github.com/knative/serving/issues/2878Requests donāt make it through the activator on AKShttps://github.com/knative/serving/issues/3026Internal Kubernetes API Calls Blocked by Istiohttps://github.com/istio/istio/issues/8696
First get the clusterĀ FQDN.
az aks show -n $CLUSTER_NAME -g $RESOURCE_GROUP -o table
Name Location ResourceGroup KubernetesVersion ProvisioningState Fqdn
--------------- ---------- --------------- ------------------- ------------------- -------------------------------------------------------------
knative-cluster eastus knative-group 1.11.8 Succeeded knative-cl-knative-group-630e95-44db6d79.hcp.eastus.azmk8s.io
Next, create the following manifest based on the FQDN.Change each one according to your own environment.
apiVersion: networking.istio.io/v1alpha3
kind: ServiceEntry
metadata:
name: azmk8s-ext
spec:
hosts:
- "knative-cl-knative-group-630e95-44db6d79.hcp.eastus.azmk8s.io"
location: MESH_EXTERNAL
ports:
- number: 443
name: https
protocol: HTTPS
resolution: DNS
---
apiVersion: networking.istio.io/v1alpha3
kind: VirtualService
metadata:
name: tls-routing
spec:
hosts:
- knative-cl-knative-group-630e95-44db6d79.hcp.eastus.azmk8s.io
tls:
- match:
- port: 443
sniHosts:
- knative-cl-knative-group-630e95-44db6d79.hcp.eastus.azmk8s.io
route:
- destination:
host: knative-cl-knative-group-630e95-44db6d79.hcp.eastus.azmk8s.io
Once you have set up your istio, check your podĀ again.
kubectl get pods --namespace knative-serving
NAME READY STATUS RESTARTS AGE
activator-6f7d494f55-sdhcw 2/2 Running 8 16m
autoscaler-5cb4d56d69-xng46 2/2 Running 8 16m
controller-6d65444c78-wrnnc 1/1 Running 0 16m
webhook-55f88654fb-tndgw 1/1 Running 0 16m
Make sure youāre allĀ running.
Expand build
kubectl apply --filename https://github.com/knative/build/releases/download/v0.4.0/build.yaml
Check theĀ pod
kubectl get pods --namespace knative-build
NAME READY STATUS RESTARTS AGE
build-controller-68dfb74954-vx4rb 1/1 Running 0 12s
build-webhook-866fd64885-dsmdn 1/1 Running 0 12s
Expand eventing.
kubectl apply --filename https://github.com/knative/eventing/releases/download/v0.4.0/release.yaml
Check theĀ pod
kubectl get pods --namespace knative-eventing
NAME READY STATUS RESTARTS AGE
eventing-controller-756d56fc7-t64lq 1/1 Running 0 35s
in-memory-channel-controller-79ccbb59c-87cnr 1/1 Running 0 22s
in-memory-channel-dispatcher-5c864b94f4-x5jgk 2/2 Running 1 20s
webhook-85f7f4fb6-tdk46 1/1 Running 0 34s
Expand eventing-sources.
kubectl apply --filename https://github.com/knative/eventing-sources/releases/download/v0.4.0/release.yaml
Check theĀ pod
kubectl get pods --namespace knative-sources
NAME READY STATUS RESTARTS AGE
controller-manager-0 1/1 Running 0 18m
Expand monitoring
kubectl apply --filename https://github.com/knative/serving/releases/download/v0.4.0/monitoring.yaml
Check theĀ pod
kubectl get pods --namespace knative-monitoring
NAME READY STATUS RESTARTS AGE
elasticsearch-logging-0 1/1 Running 0 18m
elasticsearch-logging-1 1/1 Running 0 17m
grafana-754bc795bb-cm82c 1/1 Running 0 17m
kibana-logging-7f7b9698bc-pnbp9 1/1 Running 0 18m
kube-state-metrics-768dfff9c5-c4mf2 4/4 Running 0 17m
node-exporter-2snzs 2/2 Running 0 17m
node-exporter-7tnjp 2/2 Running 0 17m
node-exporter-95k29 2/2 Running 0 17m
prometheus-system-0 1/1 Running 0 17m
prometheus-system-1 1/1 Running 0 17m
Expand clusterrole
kubectl apply --filename https://raw.githubusercontent.com/knative/serving/v0.4.0/third_party/config/build/clusterrole.yaml
All installation is completeĀ above.
Operation check
Check the operation according to the document.https://www.knative.dev/docs/install/getting-started-knative-app/
Expand the following:
apiVersion: serving.knative.dev/v1alpha1
kind: Service
metadata:
name: helloworld-go
namespace: default
spec:
runLatest:
configuration:
revisionTemplate:
spec:
container:
image: gcr.io/knative-samples/helloworld-go
env:
- name: TARGET
value: "Go Sample v1"
Specify INGRESSGATEWAY.
INGRESSGATEWAY=knative-ingressgateway
if kubectl get configmap config-istio -n knative-serving &> /dev/null; then
INGRESSGATEWAY=istio-ingressgateway
fi
Specify Gateway and checkĀ SVC.
kubectl get svc $INGRESSGATEWAY --namespace istio-system
NAME TYPE CLUSTER-IP EXTERNAL-IP PORT(S) AGE
istio-ingressgateway LoadBalancer 10.0.101.139 104.41.153.79 80:31380/TCP,443:31390/TCP,31400:31400/TCP,15011:30458/TCP,8060:31092/TCP,853:30754/TCP,15030:30403/TCP,15031:30798/TCP 53m
Get IP.
export IP_ADDRESS=$(kubectl get svc $INGRESSGATEWAY --namespace istio-system --output 'jsonpath={.status.loadBalancer.ingress[0].ip}')
URL Check
kubectl get ksvc helloworld-go --output=custom-columns=NAME:.metadata.name,DOMAIN:.status.domain
NAME DOMAIN
helloworld-go helloworld-go.default.example.com
Confirm that āHello Go Sample v1!ā Is comingĀ back.
curl -H "Host: helloworld-go.default.example.com" http://${IP_ADDRESS}
Hello Go Sample v1!
The operation check is completeĀ above.
Summary
Knative now works in Azure.In the future, applications using knative will also increase.Also, if you use Knative Lambda Runtime, you will be able to do Lambda on Azure.Iām looking forward toĀ it.
Original Content (Japanese)Ā : http://level69.net/archives/26443